Invest in a Germ Guardian air purifier if you have allergies or asthma. The air filtration systems provided by Gemguardian technologies are top-notch since they employ both activated carbon pre-filters and HEPA filters. These filters are notoriously good at capturing even the tiniest of particles.
The health of your family, especially young children and the elderly, could be at risk if your air filter is unclean. So they need regular maintenance and replacement to function at peak performance and maintain a healthy environment in your house.
And to help you eliminate that horrible smell, we’ve put together a guide on cleaning Germ Guardian air purifiers.
How To Clean Germ Guardian Air Purifiers?
Among the most crucial parts of the air purifier is the Germguardian filter. It not only cleans the air by filtering out harmful particles but also traps and destroys germs, viruses, and other irritants. That’s why maintaining a clean filter is so important. Even though it can be hard to clean a GermGuardian, the steps below will make it easier.
- Turn off your Germguardian.
- To take out the filter, push one end in and pull it out.
- To clean the filter, run water through it for a minute or two.
- Soak the filter in hot water and vinegar for 15 minutes.
- To clean the filter, run it under water for a minute.
- Remove the filter, shake out excess water, and replace it in the machine.
- Connect the Germguardian and activate it.
- If the unit has an unpleasant vinegar smell, you should run an air purifier in the room for at least an hour.
- Please disconnect your Germguardian and turn it off.
- Do not reinstall the filter until it has dried completely.
Read More: Best Germ Guardian Air Purifiers
When Should You Clean Your Filter?
It’s vital to know when to clean your Germguardian filter and how. Cleaning the filter may be necessary if your unit isn’t performing as well as it once did or if the air quality is deteriorating.
If your filter has changed color or has a lot of dust or pet hair, this is another sign that it needs to be cleaned. Maintenance can keep your Germguardian working like new.
How to Put Filter Back?
After the filter has been cleaned, it is time to put it back into the device where it belongs. Here’s how to do it:
- Remove the filter from the device by first opening the unit’s front cover.
- Clean the filter by running it under some warm water.
- Squeeze as much water from the filter as possible, then set it somewhere sunny to dry.
- After the filter has been cleaned and allowed to air dry completely, place it back into the instrument.
- Put the front cover back on, and then turn the power on.
- The light that indicates that the filter needs to be replaced will illuminate and remain lit for approximately five minutes while the filter is loaded into memory.
- The indication light will turn off once your device is ready for usage.
How to Tell if Filter Needs Cleaning?
To get the most out of your Germguardian filter, you should clean it regularly. When the filter needs to be cleaned:
- Through the filter, it gets hard to breathe.
- The filter emits an odor.
- The filter turns a different color.
If any of these things happen, you need to clean your filter. To clean the filter, you will need water, vinegar, and, if you want, a cleaning brush.
Conclusion
When it comes to preserving the quality of the air in your home, a Germguardian filter can be a real lifesaver. However, to maintain the filter’s functionality, it is essential to clean it regularly to keep doing its job.
In this article, we have discussed cleaning to Germguardian air purifier, and by adhering to these steps, you can make your purifier as good as new and get it squeaky clean.
Read More:
Leave a Reply